Skip to main navigation menu Skip to main content Skip to site footer
Academia Open

Engineering

Vol 8 No 2 (2023): December

Risk Identification Of Roll Forming Machine Area With The (HIRARC) Approach at PT. Bumi Lestrai Karya Perkasa
Identifikasi Risiko Area Roll Forming Dengan Pendekatan (HIRARC) Di PT. Bumi Lestari Karya Perkasa



(*) Corresponding Author
DOI
https://doi.org/10.21070/acopen.8.2023.7744
Published
December 1, 2023

Abstract

PT. Bumi Lestari Karya Perkasa experiences 25 workplace accidents in a year. The purpose of this study is to estimate the amount of potential work accident risks in the field of roll forming machines and to control risks with appropriate Personal Protective Equipment (PPE) to reduce occupational risks. The Hazard Identification Risk Assessment and Risk Control (HIRARC) method was used in this study. This research is a qualitative research. Field observations, literature study of company documents, and in-depth interviews with the SMK3 division at PT. Bumi Lestari Karya Perkasa is used to collect data. The risk score is calculated first in the analysis. This research resulted in identification of companies in an effort to improve the safety of all work in the roll forming machine area to avoid unsafe actions and unsafe conditions, as well as the use of Personal Protective Equipment (PPE) by adjusting the type of work being carried out and the lack of awareness about the importance of tools. Personal Protection (PPE).

Highlights :

  • Quantifying Risk: Using HIRARC method to assess and quantify potential work accident risks provides a structured approach to understanding and addressing safety concerns.
  • Qualitative Research Approach: Employing field observations, literature study, and in-depth interviews allows for a comprehensive understanding of the factors contributing to workplace accidents.
  • Emphasis on Prevention: Identifying unsafe actions and conditions underscores the importance of proactive measures, such as proper PPE usage and raising awareness among employees, to mitigate occupational risks.

Keywords - Work Risk; Work Accident; Roll Forming

References

  1. V. A. Maulana, "Pengaruh Keselamatan dan Kesehatan Kerja (K3) Terhadap Kinerja Petugas," Jurnal Kesehatan Masyarakat, vol. 17, no. 2, pp. 270–277, 2020.
  2. T. E. Saragi and R. E. Sinaga, "Keselamatan dan Kesehatan Kerja (K3) Pada Proyek Pembangunan Rumah Susun Lanjutan Provinsi Sumatera Utara I Median," Jurnal Teknik Sipil, vol. 1, no. 1, pp. 41–48, 2021.
  3. P. Bismantolo, Helmizar, I. Wiranto, H. V. Hoten, and Nurbaiti, "Proses Rebending Menggunakan Roll Forming Pada Plat SS 400 / JIS G3101 di dalam Pembuatan Corrugation Steel Plate Model 47J9-1C," Jurnal Teknik Mesin, vol. 4, no. 1, pp. 33–37, 2020.
  4. N. Panjaitan, "Bahaya Kerja Pengolahan RSS (Ribbed Smoke Sheet) Menggunakan Metode Hazard Identification and Risk Assessment di PT. PQR," Jurnal Teknik Industri, vol. 19, no. 2, pp. 50–57, 2017.
  5. S. R. T. Handari and M. S. Qolbi, "Faktor-Faktor Kejadian Kecelakaan Kerja Pada Pekerja Ketinggian di PT. X Tahun 2019," Jurnal Ilmiah Manajemen Sumber Daya Manusia, vol. 17, no. 1, pp. 90–98, 2021.
  6. Y. R. B. Sitepu and J. N. Simanungkalit, "Identifikasi Bahaya, Penilaian Risiko, dan Pengendalian Risiko Menggunakan Analisis Metode HIRARC," Jurnal Teknik Industri, vol. 2, no. 4, pp. 495–504, 2020.
  7. T. D. Aminestia and P. N. Prasetyono, "Identifikasi Risiko Kecelakaan Kerja Pada Proyek Pembangunan Gedung Rumah Sakit Siti Khodijah Sidoarjo," Jurnal Konstruksi, vol. 1, no. 1, pp. 59-65, 2023.
  8. N. Hamonangan, N. Maelisa, and R. Serang, "Analisa Risiko Pada Proyek Rehabilitasi Gedung Arsip Unit Hidrologi Balai Sungai Wilayah Maluku," Jurnal Manumata, vol. 8, no. 2, pp. 167-176, 2022.
  9. S. Indragiri and T. Yuttya, "Manajemen Risiko K3 Menggunakan Hazard Identification Risk Assessment and Risk Control (HIRARC)," Jurnal Kesehatan dan Keselamatan Kerja, vol. 9, no. 1, pp. 39–52, 2018.
  10. G. E. M. Soputan, B. F. Sompie, and R. J. M. Mandagi, "Manajemen Risiko Kesehatan dan Keselamatan Kerja (K3) (Study Kasus Pada Pembangunan Gedung SMA Eben Haezar)," Jurnal Teknik Sipil dan Lingkungan, vol. 4, no. 4, pp. 229–238, 2014.
  11. P. Giananta, J. Hutabarat, and Soemanto, "Analisa Potensi Bahayadan Perbaikan Sistem Keselamatan dan Kesehatan Kerja Menggunakan Metode HIRARC di PT. Boma Bisma Indra," Jurnal Teknik Industri, vol. 3, no. 2, pp. 106–110, 2020.
  12. B. A. W. Sepang, J. Tjakra, J. E. C. Langi, and D. R. O. Walangitan, "Manajemen Risiko Keselamatan dan Kesehatan Kerja (K3) Pada Proyek Pembangunan Ruko Orlens Fashion Manado," Jurnal Manajemen Proyek dan Konstruksi, vol. 1, no. 4, pp. 282–288, 2013.
  13. N. Roikhana, A. S. Effasa, M. Renggani, and A. Y. Nur, "Analisis Manajemen Risiko Pada Rumah Produksi Kerajinan Anyaman Sintetis Menggunakan Metode HIRARC," Jurnal Teknik Industri, vol. 1, no. 1, pp. 83–89, 2023.
  14. M. Siska and M. Gassani, "Analisis 5S dan HIRARC Pada Stasiun Kerja Rotary, Dryer dan Veneer Compouser di PT. Asia Forestama Raya Pekanbaru," Jurnal Rekayasa Industri, vol. 4, no. 1, pp. 21-28, 2018.
  15. R. D. Putra, B. Sukandari, W. Wihartono, and B. Saudiaz, "Risk Management of Occupational Safety and Health in Kri Docking Project Using Hazard Identification, Risk Assessment and Risk Control (HIRARC) Method Case Study: PT. PAL Indonesia," Jurnal Ilmiah Teknik Kelautan, vol. 10, no. 2, pp. 76-91, 2019.
  16. R. A. S. Yoga, M. Suef, and I. Sudarso, "Mitigation of Fire Risk Using HIRARC Method in a Flexible Plastic Printing Company," Jurnal Teknologi Industri dan Kemanusiaan, vol. 0, no. 5, pp. 559-563, 2019.
  17. F. S. Zahra and Sutrisno, "Analisis Bahaya dan Penilaian Risiko Menggunakan Metode HIRARC PT. Cahaya Mekanindo Perkasa," Jurnal Teknik Industri, vol. 20, no. 1, pp. 255–264, 2022.
  18. R. N. Putri and M. Trifiananto, "Analisa Hazard Identification Risk Assessment And Risk Control (Hirarc) Pada Perguruan Tinggi Yang Berlokasi Di Pabrik," 2019.
  19. R. M. Zein, M. Jufriyanto, and Y. Pandu, "Manajemen Risiko Pada Proses Produksi Tanki Air: Metode Hazard Identification Risk Assessment Risk Control (HIRARC)," Jurnal Teknik Industri, vol. 19, no. 2, 2022.
  20. R. Wardhana and Lukmandono, "Desain Cost Control Pada Risk Management Dengan Metode Expected Money Value (Emv) Dan Hirarc di PT XYZ Jawa Timur Surabaya," PROZIMA, vol. 1, no. 1, pp. 12-22, 2017.
  21. I. P. Wicaksono, "Identifikasi Potensi Bahaya Dengan Metode Hazard Identification, Risk Assessment And Risk Control (HIRARC) (Studi Kasus: UMKM Logam)," Jurnal Manajemen Bisnis dan Kewirausahaan, 2020.

Downloads

Download data is not yet available.