Basima S Dawood AL – Badri (1)
General Background: Copper oxide (CuO) is a promising semiconductor due to its excellent optical, electrical, and catalytic properties, making it suitable for applications in photovoltaics, sensors, and catalysis. Specific Background: However, the fabrication of highly pure, single-phase nanostructured CuO thin films remains challenging, as many synthesis methods produce mixed phases of Cu, CuO, and Cu₂O, reducing material performance. Knowledge Gap: Few studies have systematically optimized sputtering parameters—particularly gas ratios and electrode spacing—in dual magnetron sputtering systems to precisely control phase purity and morphology. Aims: This research aimed to synthesize and characterize highly pure nanostructured CuO thin films using a home-made dual magnetron sputtering system by adjusting argon-to-oxygen ratios and electrode distances. Results: The films prepared at an Ar:O₂ ratio of 1:1 and 2.5 cm electrode spacing exhibited a single-phase CuO confirmed by XRD, with particle sizes decreasing from 44.99 nm to 19.68 nm as oxygen increased. AFM and FE-SEM showed enhanced surface roughness, while UV-Vis analysis revealed a 1.3 eV band gap suitable for solar absorption. Novelty: This study demonstrates a refined sputtering configuration enabling reproducible synthesis of pure CuO nanostructures. Implications: The findings support improved CuO thin-film production for solar energy and optoelectronic devices.Highlight :
CuO thin films were synthesized using dual magnetron sputtering with controlled Ar:O₂ ratios.
Single-phase CuO was obtained at 1:1 gas ratio and 2.5 cm electrode distance.
The films showed high optical transmittance and a 1.3 eV band gap suitable for solar energy use.
Keywords : Copper Oxide, Magnetron Sputtering, Nanostructured, Synthesis, Thin Film
Balamurugan, B., and Mehta, B. R., “Optical and Structural Properties of Nanocrystalline Copper Oxide Thin Films Prepared by Activated Reactive Evaporation,” Thin Solid Films, vol. 396, pp. 90–96, 2001. doi: 10.1016/S0040-6090(01)01171-2
Richardson, T. J., Slack, J. L., and Rubin, M. D., “Electrochromism of Copper Oxide Thin Films,” Applied Physics Letters, vol. 98, pp. 262–263, 2000. doi: 10.1063/1.1320812
He, H., Bourges, P., and Sidis, Y., “Magnetic Resonant Mode in the Single-Layer High-Temperature Superconductor Tl₂Ba₂CuO₆+δ,” Science, vol. 295, no. 5557, pp. 1045–1047, 2002. doi: 10.1126/science.1067877
Orel, B., Svegl, F., Bukovec, N., and Kosec, M., “Structural and Optical Characterization of CuO Particulate Solid Films and the Corresponding Gels and Xerogels,” Journal of Non-Crystalline Solids, vol. 159, nos. 1–2, pp. 49–64, 1993. doi: 10.1016/0022-3093(93)91277-6
Ogwu, A. A., Bouquerel, E., Ademosu, O., Moh, S., Crossan, E., and Placido, F., “An Investigation of the Surface Energy and Optical Transmittance of Copper Oxide Thin Films Prepared by Reactive Magnetron Sputtering,” Acta Materialia, vol. 53, pp. 5151–5159, 2005. doi: 10.1016/j.actamat.2005.06.026
Oral, A. Y., Mensur, E., Aslan, M. H., and Basaran, E., “The Preparation of Copper(II) Oxide Thin Films and the Study of Their Microstructures and Optical Properties,” Materials Chemistry and Physics, vol. 83, no. 1, pp. 140–144, 2004. doi: 10.1016/S0254-0584(03)00224-4
Jiang, X., Herricks, T., and Xia, Y., “CuO Nanowires Can Be Synthesized by Heating Copper Substrates in Air,” Nano Letters, vol. 2, no. 12, pp. 1333–1338, 2002. doi: 10.1021/nl0258574
Voinea, M., Vladuta, C., Bogatu, C., and Duta, A., “Surface Properties of Copper-Based Cermet Materials,” Materials Science and Engineering B, vol. 152, nos. 1–3, pp. 76–80, 2008. doi: 10.1016/j.mseb.2008.07.020
Maruyama, T., “Copper Oxide Thin Films Prepared by Chemical Vapor Deposition from Copper Dipivaloylmethanate,” Solar Energy Materials and Solar Cells, vol. 56, no. 1, pp. 85–92, 1998. doi: 10.1016/S0927-0248(98)00109-2
Reddy, A. S., Park, H.-H., and Reddy, V. S., “Effect of Sputtering Power on the Physical Properties of DC Magnetron Sputtered Copper Oxide Thin Films,” Materials Chemistry and Physics, vol. 110, nos. 2–3, pp. 397–401, 2008. doi: 10.1016/j.matchemphys.2008.02.030
Mugwang’a, F. K., Karimi, P. K., Njoroge, W. K., Omayio, O., and Waita, S. M., “Optical Characterization of Copper Oxide Thin Films Prepared by Reactive DC Magnetron Sputtering for Solar Cell Applications,” International Journal of Thin Film Science and Technology, vol. 2, no. 1, pp. 15–24, 2013.
Nordin, N. R., and Shamsuddin, M., “Biosynthesis of Copper(II) Oxide Nanoparticles Using Murayya koenigii Aqueous Leaf Extract and Its Catalytic Activity in 4-Nitrophenol Reduction,” Malaysian Journal of Fundamental and Applied Sciences, vol. 15, pp. 218–224, 2019. doi: 10.11113/mjfas.v15n2.1167
Nasrollahzadeh, M., Sajadi, S. M., Rostami-Vartooni, A., and Hussin, S. M., “Green Synthesis of CuO Nanoparticles Using Aqueous Extract of Thymus vulgaris L. Leaves and Their Catalytic Performance for N-Arylation of Indoles and Amines,” Journal of Colloid and Interface Science, vol. 466, pp. 113–119, 2016. doi: 10.1016/j.jcis.2015.12.013
JCPDS–ICDD, “Powder Diffraction File (PDF) Reference No. 45-0937 (CuO) and 33-0480 (Cu₂O),” PCPDF WIN Version 1.30, International Centre for Diffraction Data, 2002.
Kliche, K., and Popovic, Z. V., “Far-Infrared Spectroscopic Investigations on CuO,” Physical Review B, vol. 42, no. 14, pp. 10060–10066, 1990. doi: 10.1103/PhysRevB.42.10060
El-Trass, A., Elshamy, H., Mehasseb, I., and El-Kemary, M., “CuO Nanoparticles: Synthesis, Characterization, Optical Properties and Interaction with Amino Acids,” Applied Surface Science, vol. 258, no. 7, pp. 2997–3001, 2012. doi: 10.1016/j.apsusc.2011.11.025
Sundaramurthy, N., and Parthiban, C., “Biosynthesis of Copper Oxide Nanoparticles Using Pyrus pyrifolia Leaf Extract and Evaluation of Catalytic Activity,” International Research Journal of Engineering and Technology, vol. 2, pp. 332–338, 2015.
Zhang, Y. C., Tang, J. Y., Wang, G. L., Zhang, M., and Hu, X. Y., “Tailoring the Crystal Shape in High-Temperature Solution Resulted in a Simultaneous Growth of CuO and Cu₂O,” Journal of Crystal Growth, vol. 294, pp. 278–282, 2006. doi: 10.1016/j.jcrysgro.2006.06.015
Dilaveez, R., Mahendiran, D., Senthil, K. R., and Kalilur, R. A., “Bioprocess and Biosystems Engineering,” Bioprocess and Biosystems Engineering, vol. 40, no. 6, pp. 943–951, 2017. doi: 10.1007/s00449-017-1754-y
Onah, D. U., Ugwu, E. I., and Ekpe, J. E., “Optical Properties of Nanocrystalline TiO₂/CuO Core-Shell Thin Films by Thermal Annealing,” American Journal of Nano Research and Applications, vol. 3, no. 3, pp. 62–65, 2015. doi: 10.11648/j.nano.20150303.11
Bauer, J., “Optical Absorption and Photoconductivity of CuO,” Physica Status Solidi A, vol. 39, no. 1, pp. 411–418, 1977. doi: 10.1002/pssa.2210390151