Zainab Kadhim Al-Khazragie (1), Haneen H. Talib (2), Zuhoor Jawad Younis (3), Sabah Abbas Malık (4), Ali Faisal Hussein (5)
General Background: The increasing global demand for sustainable practices in the lubricants industry has highlighted the potential for utilizing industrial waste to enhance lubrication formulations. Specifically, the use of polyethylene wax derived from industrial waste offers a promising avenue for improving polymer performance. Specific Background: In Iraq, the development of lubricating oil formulations utilizing locally sourced industrial waste remains underexplored. The synthesis of copolymers from polyethylene wax and alkyl acrylates presents a novel approach to improving the efficiency of lubricants. Knowledge Gap: While numerous studies have focused on the role of polymer additives in lubrication, there is a lack of research on the application of waste-derived copolymers, particularly in the context of the Iraqi oil industry. Aim: This study investigates the synthesis and characterization of poly(2-ethylhexyl acrylate-co-polyethylene wax) (TND-W) copolymer derived from industrial waste, and evaluates its efficacy as a viscosity modifier (VM) and pour point depressant (PPD) in lubricating oils. Results: The synthesized copolymer demonstrated significant improvements in the viscosity and pour point properties of base oils. The copolymer's performance was shown to be concentration-dependent, with the optimal performance observed at 4000 ppm. However, increasing the concentration beyond this level resulted in reduced effectiveness due to solubility limitations in the base oils, especially at lower temperatures. Novelty: This research introduces a sustainable approach to enhancing lubricating formulations by utilizing industrial waste materials, a method not commonly explored in previous studies within the context of the Iraqi oil industry. Implications: The findings provide valuable insights for the oil industry, particularly in the development of eco-friendly lubricants. The study's implications extend to environmental sustainability, suggesting a practical solution for incorporating waste-derived materials into industrial applications.
Highlights:
Keywords: Copolymer, Lubricating Oil, Polyethylene Wax, Pour Point Depressant, Viscosity Modifier (VM)
A. M. Nassar, “The Behavior of Polymers as Viscosity Index Improvers,” Petroleum Science and Technology, vol. 26, no. 5, pp. 514–522, 2008.
S. M. Jalilian and F. Ziaee, “Polymerization Parameters of Methacrylic Acid Esters as Viscosity Index Improvers in Lubricants,” Iranian Journal of Polymer Science and Technology, vol. 32, pp. 123–134, 2019.
S. Q. A. Rizvi, A Comprehensive Review of Lubricant Chemistry, Technology, Selection, and Design. West Conshohocken, PA, USA: ASTM International, 2009.
A. Singh, N. Verma, T. G. Mamatha, A. Kumar, S. Singh, and K. Kumar, “Properties, Functions and Applications of Commonly Used Lubricant Additives: A Review,” Materials Today: Proceedings, vol. 44, pp. 5018–5022, 2021.
H. I. Al-Shafey and E. I. Arafa, “Synthesis and Evaluation of Multifunction Copolymer as Lubricating Oils Additives,” Petroleum and Petrochemical Engineering Journal, vol. 2, no. 4, pp. 1–9, 2018.
R. I. El-Shazly, R. S. Kamal, A. M. Nassar, N. S. Ahmed, and G. H. Sayed, “The Behavior of Some Terpolymers as Lubricating Oil Additives,” Applied Petrochemical Research, vol. 10, no. 3, pp. 115–123, 2020.
F. S. Salih, R. K. Zaidan, and K. A. R. Ali, “Preparation of the Antioxidant Compounds from the Styrene and p-Benzoquinone Compounds to the Lubricant Oils,” Misan Journal of Academic Studies, vol. 21, no. 44, pp. 299–318, 2022.
P. Cusseau, N. Bouscharain, L. Martinie, D. Philippon, P. Vergne, and F. Briand, “Rheological Considerations on Polymer-Based Engine Lubricants: Viscosity Index Improvers Versus Thickeners—Generalized Newtonian Models,” Tribology Transactions, vol. 61, no. 3, pp. 437–447, 2018.
J. Lomège, C. Negrell, J. J. Robin, V. Lapinte, and S. Caillol, “Synthesis of Alkyl Sulfur-Functionalized Oleic Acid-Based Polymethacrylates and Their Application as Viscosity Index Improvers in a Mineral Paraffinic Lube Oil,” Journal of the American Oil Chemists’ Society, vol. 97, no. 3, pp. 309–318, 2020.
A. K. Mohammed and M. N. Khalaf, “Synthesis and Characterization of Copolymers as Pour Point Depressants and Viscosity Index Improvers for Lubricating Oil,” Journal of Kufa for Chemical Science, vol. 2, no. 9, pp. 264–285, 2021.
T. A. Jwaid, M. N. Khalaf, and H. S. Abbo, “Synthesis and Characterization of New Long Chain Aliphatic Polyesters Derived from Dicarboxylic Acid with Diols Using p-Toluene Sulfonic Acid as Catalyst,” Journal of Kufa for Chemical Science, vol. 2, no. 8, pp. 157–171, 2022.
M. J. Covitch and K. J. Trickett, “How Polymers Behave as Viscosity Index Improvers in Lubricating Oils,” Advances in Chemical Engineering and Science, vol. 5, no. 2, pp. 134–151, 2015.
G. Li, Q. Hua, Z. Huang, and Z. Da, “Progress on Polymethacrylate as Viscosity Index Improvers for Lube Oil,” Chemical Industry and Engineering Progress, vol. 42, no. 3, pp. 1562–1571, 2023.
R. A. Patterson, C. P. Kabb, D. M. Nickerson, and E. Pashkovski, “Compositionally Driven Viscometric Behaviors of Poly(Alkyl Methacrylates) in Lubricating Oils,” Advances in Chemical Engineering and Science, vol. 12, no. 2, pp. 65–86, 2022.
A. Martini, U. S. Ramasamy, and M. Len, “Review of Viscosity Modifier Lubricant Additives,” Tribology Letters, vol. 66, no. 2, p. 58, 2018.
P. Panwar, E. Schweissinger, S. Maier, S. Hilf, S. Sirak, and A. Martini, “Effect of Polymer Structure and Chemistry on Viscosity Index, Thickening Efficiency, and Traction Coefficient of Lubricants,” Journal of Molecular Liquids, vol. 359, p. 119215, 2022.
L. Mu, J. Wu, L. Matsakas, M. Chen, U. Rova, P. Christakopoulos, J. Zhu, and Y. Shi, “Two Important Factors of Selecting Lignin as Efficient Lubricating Additives in Poly(Ethylene Glycol): Hydrogen Bond and Molecular Weight,” International Journal of Biological Macromolecules, vol. 129, pp. 564–570, 2019.
G. Karmakar and P. Ghosh, “Soybean Oil as a Biocompatible Multifunctional Additive for Lubricating Oil,” ACS Sustainable Chemistry & Engineering, vol. 3, no. 1, pp. 19–25, 2015.
A. Mohammed, R. Dhedan, W. Mahmood, and A. Musa, “Copolymers of Castor and Corn Oils with Lauryl Methacrylate as Green Lubricating Additives,” Egyptian Journal of Chemistry, vol. 64, no. 8, pp. 4271–4276, 2021.
M. Goodarzi, D. Toghraie, M. Reiszadeh, and M. Afrand, “Experimental Evaluation of Dynamic Viscosity of ZnO–MWCNTs/Engine Oil Hybrid Nanolubricant Based on Changes in Temperature and Concentration,” Journal of Thermal Analysis and Calorimetry, vol. 136, pp. 513–525, 2019.
I. Minami, “Molecular Science of Lubricant Additives,” Applied Sciences, vol. 7, no. 5, p. 445, 2017.
Y. Ren, Z. Chen, H. Du, L. Fang, and X. Zhang, “Preparation and Evaluation of Modified Ethylene–Vinyl Acetate Copolymer as Pour Point Depressant and Flow Improver for Jianghan Crude Oil,” Industrial & Engineering Chemistry Research, vol. 56, no. 39, pp. 11161–11166, 2017.
L. R. Rudnick, Lubricant Additives: Chemistry and Applications, 3rd ed. Boca Raton, FL, USA: CRC Press, 2017.
S. A. Khalafvandi, M. A. Pazokian, and E. Fathollahi, “The Investigation of Viscometric Properties of the Most Reputable Types of Viscosity Index Improvers in Different Lubricant Base Oils: API Groups I, II, and III,” Lubricants, vol. 10, no. 1, p. 6, 2022.
L. Cosimbescu, A. Vellore, U. S. Ramasamy, S. A. Burgess, and A. Martini, “Low Molecular Weight Polymethacrylates as Multi-Functional Lubricant Additives,” European Polymer Journal, vol. 104, pp. 39–44, 2018.
A. M. Al-Sabagh, T. M. Khalil, M. W. Sabaa, T. T. Khidr, and G. R. Saad, “Poly(n-Alkyl Itaconate-Co-Vinyl Acetate) as Pour Point Depressants for Lube Oil in Relation to Rheological Flow Properties,” Journal of Dispersion Science and Technology, vol. 33, no. 11, pp. 1649–1660, 2012.
M. Schirru, “Development of an Ultrasonic Sensing Technique to Measure Lubricant Viscosity in Engine Journal Bearing In-Situ,” Ph.D. dissertation, 2017.
P. Bezot, C. Hesse-Bezot, D. Faure, and J. C. Calvez, “Effect of Mechanical Stress on Four Viscosity Improver Polymers,” Lubrication Science, vol. 12, no. 4, pp. 301–312, 2000.
D. B. Braun and M. R. Rosen, Rheology Modifiers: Practical Use and Application. Norwich, NY, USA: William Andrew Publishing, 2000.
M. Silverstein, F. X. Webster, and D. J. Kiemle, Spectrometric Identification of Organic Compounds, 4th ed. New York, NY, USA: John Wiley and Sons, 2005.
M. A. Jalal, M. N. Khalaf, and M. A. Hussein, “Drag Reduction Assessment of Some New Copolymers of 1-Hexene and Maleic Anhydride in Light Crude Oil,” Petroleum Science and Technology, vol. 39, pp. 632–645, 2021.
R. M. Nasser, N. S. Ahmed, and A. M. Nassar, “Terpolymers for Modifying the Performance Properties of Engine Oil,” Applied Petrochemical Research, vol. 5, no. 1, pp. 61–69, 2015.
H. S. Al-Atbi, I. J. Al-Assadi, B. K. Al-Salami, and S. Q. Badr, “Study of New Azo-Azomethine Derivatives of Sulfanilamide: Synthesis, Characterization, Spectroscopic, Antimicrobial, Antioxidant and Anticancer Activity,” Biochemical and Cellular Archives, vol. 20, no. 2, pp. 4161–4174, 2020.
A. Potthast et al., “Comparison Testing of Methods for Gel Permeation Chromatography of Cellulose: Coming Closer to a Standard Protocol,” Cellulose, vol. 22, no. 3, pp. 1591–1613, 2015.
E. Faujdar, H. Negi, A. Kukrety, and R. K. Singh, “Study of Alkyl Acrylate-Co-Maleic Anhydride-Based Novel Amide Copolymers as Multifunctional Lubricant Additives,” Polymer Bulletin, vol. 78, no. 4, pp. 2085–2102, 2021.
N. M. Nurazzi et al., “Thermogravimetric Analysis Properties of Cellulosic Natural Fiber Polymer Composites: A Review on Influence of Chemical Treatments,” Polymers, vol. 13, no. 16, p. 2710, 2021.
Z. T. Al-Malki and M. N. Khalaf, “Synthesis and Characterization of Novel Terpolymers as Viscosity Index Improvers Using Industrial Waste for Iraqi Lubricating Oil,” Indonesian Journal of Chemistry, vol. 24, no. 3, pp. 835–844, 2024.
A. M. Nassar, N. S. Ahmed, R. M. Nasser, and Y. K. Abd El Menem, “Preparation and Evaluation of the Mixtures of Sulfonate and Phenate as Lube Oil Additives,” International Journal of Industrial Chemistry, vol. 8, no. 4, pp. 383–395, 2017.
J. C. O. Santos, I. M. Garcia Dos Santos, A. G. Souza, E. V. Sobrinho, V. J. Fernandes, and A. J. N. Silva, “Thermoanalytical and Rheological Characterization of Automotive Mineral Lubricants After Thermal Degradation,” Fuel, vol. 83, no. 17–18, pp. 2393–2399, 2004.
R. L. Stambaugh, “Viscosity Index Improvers and Thickeners,” in Chemistry and Technology of Lubricants, 3rd ed., Springer, 2014, pp. 124–159.
A. Martini, U. S. Ramasamy, and M. Len, “Review of Viscosity Modifier Lubricant Additives,” Tribology Letters, vol. 66, no. 2, pp. 1–34, 2018.
D. Roy, S. Paul, S. Yeasmin, and P. Ghosh, “Synthesis of Linseed Oil-Based Biodegradable Homo and Copolymers: Role as Multifunctional Greener Additives in Lube Oil,” Journal of Macromolecular Science, Part A: Pure and Applied Chemistry, vol. 58, no. 1, pp. 2–7, 2021.
N. S. Ahmed, A. M. Nassar, R. M. Nasser, M. E. Abdel Raouf, and A. F. El-Kafrawy, “The Rheological Properties of Lube Oil with Terpolymeric Additives,” Petroleum Science and Technology, vol. 32, no. 17, pp. 2115–2122, 2014.
H. Finger, Viscosity Index Improvers and Thickeners for Synthetic Lubricants. PN, 1972.
A. M. Al-Sabagh, M. W. Sabaa, G. R. Saad, T. T. Khidr, and T. M. Khalil, “Synthesis of Polymeric Additives Based on Itaconic Acid and Their Evaluation as Pour Point Depressants for Lube Oil in Relation to Rheological Flow Properties,” Egyptian Journal of Petroleum, vol. 21, no. 1, pp. 19–30, 2012.
F. Uebel, H. Thérien-Aubin, and K. Landfester, “Glycerol-Based Polyurethane Nanoparticles Reduce Friction and Wear of Lubricant Formulations,” Macromolecular Materials and Engineering, vol. 307, pp. 1–7, 2022.
A. P. Almeida, A. P. L. de Oliveira, C. D. C. Erbetta, R. G. de Sousa, R. F. de S. Freitas, and M. E. S. Ribeiro e Silva, “Rheological Study of Polymers Used as Viscosity Index Improvers for Automotive Lubricant Oils,” Journal of Modern Physics, vol. 5, no. 12, pp. 1085–1093, 2014.
C. J. Seeton, “Viscosity-Temperature Correlation for Liquids,” Tribology Letters, vol. 22, no. 1, pp. 67–78, 2006.
C. C. Chou and S. H. Lee, “Rheological Behavior and Tribological Performance of a Nanodiamond-Dispersed Lubricant,” Journal of Materials Processing Technology, vol. 201, no. 1–3, pp. 542–549, 2008.
Z. Patel, “An Overview of Different Pour Point Depressant Synthesized and Their Behaviour on Different Crude Oils,” International Journal of Creative Research Thoughts, vol. 8, no. 8, pp. 241–252, 2020.
R. Sharma, V. Mahto, and H. Vuthaluru, “Synthesis of PMMA/Modified Graphene Oxide Nanocomposite Pour Point Depressant and Its Effect on the Flow Properties of Indian Waxy Crude Oil,” Fuel, vol. 235, pp. 1245–1259, 2019.
A. M. Nassar, N. S. Ahmed, and R. M. Nasser, “Synthesis and Evaluation of Terpolymers as Viscosity Index Improvers and Pour Point Depressants,” Petroleum and Coal, vol. 59, no. 4, pp. 442–451, 2017.